
Analisis Daya Dukung Tiang Pancang Pada Konstruksi Gedung Bertingkat Dengan Metode Statis Dan Dinamis (Studi Kasus : Pembangunan Kantor Bupati Kabupaten Tana Tidung Gedung A MTL)
Pengarang : Rio Refandy - Personal Name;
Perpustakaan UBT : Universitas Borneo Tarakan., 2024XML Detail Export Citation
Abstract
Pondasi dan karakteristik tanah merupakan elemen struktur yang sangat penting. Secara umum pondasi tiang merupakan elemen struktur yang berfungsi meneruskan beban pada tanah, baik beban dalam arah vertikal maupun arah horizontal. Analisis daya dukung tiang pancang pada konstuksi gedung bertingkat dengan metode statis dan dinamis , studi kasus pembangunan Kantor Bupati Kabupaten Tana Tidung Gedung A MTL, yang dimana menggunakan uji tes sondir di lapangan dan dari data hasil uji PDA test pada tiang pondasi. Tujuan dari penelitian ini ialah untuk mengetahui kapasitas daya dukung tiang pancang berdasarkan metode Statis dari data sondir menggunakan perhitungan Mayerhoff, Aoki De Alencer, LCPC, dan Price & Wardle serta metode Dinamis menggunakan data PDA Test. Hasil dari perhitungan di dapatkan nilai daya dukung tiang kelompok metode statis yang terkecil pada titik sondir S-3 metode Price & Wardle sebesar 44,108 ton, dan nilai terbesar terdapat pada titik sondir S-2 metode Mayerhoff sebesar 316, 818 ton, Sedangkan daya dukung tiang kelompok metode dinamis dengan menggunakan data PDA Test nilai yang terkecil terdapat pada tiang TP AS 4K_1 sebesar 246,426 ton, dan nilai terbesar terdapat pada tiang TP AS 123B sebesar 371,089 ton. Adapun untuk nilai angka keamanan ( safety factor ) pada metode statis menghasilkan nilai yang terkecil pada titik sondir S-3 dengan metode Price & Wardle sebesar 0.32 , dan yang terbesar pada titik sondir S-2 dengan metode Mayerhoff sebesar 2,33 Sedangkan pada metode dinamis dengan data PDA Test nilai yang terkecil pada tiang TP AS 4K_1 sebesar 1.81, dan yang terbesar pada tiang TP AS 123B sebesar 2.73.
Kata Kunci : Daya dukung tiang pancang, statis, dinamis, tiang kelompok, angka keamanan.
Foundationsand soil characteristics are crucial structural elements. Generally, pile foundations are structural elements that transmit loads to the soil in both yertical and horizontal directions, This study analyzes the bearing capacity of driven piles in multi-story building construction using static and dynamic methods, with a case study ofthe construction of the Tana Tidung Regency Regent's Office Building A MTL, which utilizes cone penetration test (CPT) data in the field and PDA test results on the foundation piles. This study aims to determine the pile-bearing capacity based on the Static method from the CPT data using the Mayerhoff, Aoki De Alencer, LCPC, and Price & Wardle calculations and the Dynamic method using PDA Test data. The calculation results show that the minor static group pile-bearing capacity value is at the S-3 CPT point using the Price & Wardle method, which is 44.108 tons, and the most significant value is at the S-2 CPT point using the Mayerhoff method, which is 316.818 tons. Meanwhile, the dynamic group pile bearing capacity using PDA Test data shows the smallest value at the TP AS 4K_ 1 pile, 246.426 tons, and the most significant value at the TP AS 123B pile, 371.089 tons. The safety factor values for the static method result in the smallest value at the S-3 CPT point using the Price & Wardle method, which is 0.32, and the largest at the S-2 CPT point using the Mayerhoff method, which is 2.33. For the dynamic method using PDA Test data, the smallest safety factor value is at the TP AS 4K_1 pile, 1.81, and the largest is at the TP AS 123B pile, 2.73. Keywords: Pile Bearing Capacity, Static, Dynamic, Group Piles, Safety Factor