
Rancang Bangun Kompor Biomassa Menggunakan Bahan Dasar Plat Galvanis Dilengkapi Dengan Teknologi Blower
Pengarang : Henoch Cho Fui Ming - Personal Name;
Perpustakaan UBT : Universitas Borneo Tarakan., 2022XML Detail Export Citation
Abstract
Kompor biomassa merupakan sebuah kompor yang sistem pembakarannya menggunakan bahan bakar biomassa untuk memproduksi kalor melalui pembakaran untuk penggunaan proses memasak domestik. Penelitian ini bertujuan untuk merancang bangun dan menguji performansi dari kompor biomassa menggunakan bahan dasar plat galvanis dilengkapi dengan teknologi blower melalui metode pengujian Water Boiling Test (WBT). Hasil penelitian ini, kompor yang telah dibangun menggunakan bahan dasar plat galvanis dengan diameter 380 mm dan tinggi 500 mm pada badan kompor dan tungku kompor yang berdiameter 280 mm dan 450 mm yang terdapat lubang-lubang (anulus) pada dinding untuk aliran udara yang bersumber dari blower DC berkapasitas 12 volt. Daya output untuk persentase berat bahan bakar 80% (5 liter air) sebesar 82 kW dengan laju konsumsi bahan bakar sebesar 0.095 kg/s, sedangkan untuk persentase berat bahan 20% (2 liter air) sebesar 41 kW dengan laju konsumsi bahan bakar 0.035 kg/s. Efisiensi termal dari kompor biomassa berkisar 6% - 10%.
Kata Kunci: Efisiensi Termal, Kompor Biomassa, Performansi, Rancang Bangun, Water Boiling Test
A biomass stove is a stove of which combustion system uses biomass to produce heat through combustion for any domestic use. This study aims to design and test the performance of a biomass stove made of a galvanized plate as a base material and equipped with a blower technology. The testing was done using the Water Boiling Test (WBT) method. The results of this study include a stove and its performance. The stove has been built using a galvanized plate with a diameter of 380 mm and a height 500 mm on its body; the hobs or stovetops have diameters of 280 mm and 450 mm; their walls have holes (annulus) for air flow from a DC blower with a capacity 12 volts. The stove can result in an output power of 80% fuel weight (5 litres of water) of 82 kW with a fuel consumption rate of 0,095 kg/s. Meanwhile its weight percentage of 20% (2 litres of water) is 41 kW with a fuel consumption rate of 0,035 kg/s. Finally, its thermal efficiency is in the range of 6%-10%. Keywords: Thermal Efficiency, Biomass Stove, Performance, Design, Water Boiling Test